Skip to content
Smocking Plates Studio

Bishop Yoke Classic

Bishop Yoke Classic is a intermediate smocking plate charted on 41 pleats and 9 worked rows. Five rows in the order most bishop yokes use: cable, baby wave, wave, baby wave, cable. It uses cable, baby wave and wave, stitched in blush, powder blue. Everything below comes from the same engine as the Plate Designer, so you can change the colors, stitches or chest size there and get a new chart.

Bishop Yoke ClassicR1R2R3R4R5R6R7R8R9151015202530354041

The plate at a glance

LevelIntermediate
Pleats charted41
Worked rows9
Pleater setup11 pleater rows (9 worked plus one holding row above and below)
Pleated width10.25 in at 0.25 in per pleat
Raw fabric width at 3:130.75 in

It is an intermediate plate: at least one row moves between pleater lines, so keep the needle level and count pleats as you go.

Stitch by stitch

Work the rows from the top of the plate down. Each line gives the row number, the color, the pleats covered and the movement to use.

  1. Row 1: Cable in Powder blue, pleats 1 to 41, 41 bites, 3 strands. Pick up each pleat on the row line and let the working thread fall alternately above and below the needle.
  2. Rows 2 to 3: Baby wave in Blush, pleats 1 to 41, 41 bites, 3 strands. Cable-style bites that step half a row up, then half a row down, one step per pleat, between two guide rows.
  3. Rows 4 to 6: Wave in Powder blue, pleats 1 to 41, 41 bites, 3 strands. Cable-style bites that climb two rows in half-row steps and come back down, one step per pleat.
  4. Rows 7 to 8: Baby wave in Blush, pleats 1 to 41, 41 bites, 3 strands. Cable-style bites that step half a row up, then half a row down, one step per pleat, between two guide rows.
  5. Row 9: Cable in Powder blue, pleats 1 to 41, 41 bites, 3 strands. Pick up each pleat on the row line and let the working thread fall alternately above and below the needle.

Floss for this plate

ColorThread (yd)Skeins neededSkeins to buy
Blush1.640.111
Powder blue2.440.161

The estimate assumes 3 strands, a quarter inch of thread per bite, four inches of tail at each end and 15 percent waste. The floss guide explains each number and how to scale it for 2, 4 or 6 strands.

Pleats by chest size

The chart above is one width. To smock the same plate on a garment, use the pleat count for the chest size in the table (front panel, 2 in of ease, 3:1 fabric ratio, 45 in fabric).

Chest (in)PleatsRaw fabric width (in)Widths of 45 in fabric
184130.751
204533.751
224936.751
245339.751
265742.751
286145.752

Mirrored plates use an odd pleat count so a single pleat sits on the center line. Plates with honeycomb use an even count because honeycomb works pleats in pairs. Sizing by chest shows the full calculation.

Before you start

  • Print the plate at 100 percent and check the one inch square on the printed PDF from any collection.
  • Pleat a test strip first and stitch two rows to check your tension.
  • Read how to read a plate if the graph notation is new to you.

Read next

  • Baby Bonnet and Bib Plates: Baby Bonnet and Bib Plates: eight printable smocking plates with sizing tables and floss estimates, $19 once, delivered as PDF and SVG.
  • Boys' Jon-Jon Plates: Boys' Jon-Jon Plates: eight printable smocking plates with sizing tables and floss estimates, $19 once, delivered as PDF and SVG.
  • Geometric Plates for Beginners: Geometric Plates for Beginners: eight printable smocking plates with sizing tables and floss estimates, $19 once, delivered as PDF and SVG.
Your order

Your order

Digital content: your files are available for download right after payment.

Sold by WEABLE SAS. Secure payment with Stripe.